Condenser flat RCSD – RCLD

This new line of condensers is suitable for big refrigeration and air conditioning installations.

Thanks wide range of models with different noise level and dimensions this range of condensers fulfill every customer needs. These condensers have standard configuration with two refrigerant circuits and they are available for horizontal or vertical installation. The heat exchanger provides very efficient heat transfer with reduced refrigerant volume even for very low fan speed rotation.

RKSD condenser with short frame for more compactness or higher capacity for the same size.

RKLD condenser with long frame for higher efficiency and lower noise.

Application area

Food & Beverage
Air conditioning

Retail distribution
Logistic centers

Technical features

Condensers suitable for fluid refrigerants HFC, HFO and NH3.

Over than 340 different models.

From 4 to 14 fans.

Capacity

From 60 to 1170 kW (ENV 327 conditions)

Fan-motors

Diameter 800 – 910 mm with aluminum or PP plastic blades and corrosion-resistant powder-coated grids. External rotor fans with thermal contacts for effective protection. Fan conveyors with optimized fan profile ensure maximum fan efficiency, lower noise and avoid air recirculation.

Each fan module is separated from the others by partition plates to avoid the phenomenon of air recirculation in case a fan is stopped.

Fin spacing

2,1 – 2,3 – 2,5 – 3,2 – 4,0 mm

Casing

Casing in corrosion-resistant powder-coated galvanized steel. Frame designed to ensure high solidity and uniform air distribution through the heat exchanger. AISI 304 stainless steel screws.

Heat exchanger

The heat exchanger is equipped with a tube suspension system that avoids contact between the tubes and the frame, ensuring complete protection of the battery against vibrations and thermal expansion.

Internally grooved tubes and special louvered fins ensure high heat exchange under any working condition.

Noise

From 30 dB(A) at 10 m distance.

Options

Vertical or horizontal installation, stainless steel tubes, stainless steel casing, coil coating, copper fins, EC fans, ATEX fans, fan speed controller, vibration dampers, fans wiring, safety switches.

Data sheet

Unit coolers and condensers for freezing tunnels

Canary Islands

For this project, we supplied three evaporators to be installed in as many freezing tunnels, a monoflow unit for a low temperature storage cell and condensers to be used with the individual refrigerator control units serving the four utilities.