All our References

For this plant Refteco has delivered external REP units, equipped with electronic expansion valve, differential air pressure switch for ON/OFF defrosting, EC fans and IN/OUT

Indeed, considering that the installation is made in a petrochemical industry, all the casing must be resistant to aggressive atmosphere: for this reason, we have

The fans speed controller permits to optimize the unit functioning basing on the effective operating conditions and the electric switchboard, mounted on-board, grants faster maintenances.

The employ of EC fans means to have a plant with high efficiency, further improved by the using of a speed controller which ensures optimum

The unit is indeed equipped with controller to manage the fans rotation speed, in order to optimize the performances and also the acoustic emissions during

Considering the type of application, the foreseen evaporators have blowing fans and dimensions suitable to grant uniform air distribution in each cold room. Moreover, the

The end user, Silex Microsystems, is the main industry in the world specialized in MEMS foundry technology. MEMS is an acronym for Micro Electro Mechanical

The design of the unit also consists of a low, compact structure with very limited impact at the esthetic level, in the setting in which

The unquestionable energy efficiency of these electronically commuted fans is further enhanced by the installation of a special control mechanism on the machine, which ensures

The order also included the supply of vertical and horizontal buffers that would ensure a correct direction of the airflow in the environment, preventing both

The particular application required the use of reversible fans to ensure perfect air distribution through the cartons of bananas for uniform ripening of the product.

The design of the unit also consists of a low, compact structure with very limited impact at the esthetic level, in the setting in which

This liquid cooler is designed for cooling of high temperature fluids ed it’s equipped with the well tested Refteco suspending tubes system that make sure

The end user main targets where to get very efficient and silent plants in order to grant comfortable and relaxing stay for hotel guests. We

The units realized for -20 °C chambers have been supplied complete of electric defrost, fan ring heaters, insulated drip tray, shut up and insulated inlet

The units have replaced existing evaporators of another contractor, they that have problems of frost e performances not adequate. Hot glycol defrost foreseen in these

REFBOX are the combination of condenser and box and they can be considered a smart solution for compact chillers and condensing units assembling. In the

To install coils with two equal imbricate circuits permits to have high cooling capacities with only one unit when the spaces are small, but keeping

For cold rooms at lowest temperature we mean rooms at -50 °C and that usually are employed, in the food industry, to blow down and

The units realized for -28 °C chambers have been supplied complete of hot gas defrost, fan ring heaters, insulated drip tray and shut up. These

The single flow evaporator installed in the production room was foreseen with adaptor collars to fix textile ducts and EC fans. These fans are the

Indeed, this type of material grants the best resistance to aggressive ambients while the insulated drip tray avoids the formation, on the lower part of

The units, for their compact design, are suitable where there are shelvings and the space for installation is limited. Moreover, the 6 poles fans wired

The units realized for -25 °C chambers are made for installation in niche and for this reason they are equipped with legs of support, big

The units are realized complete of hot gas defrost in the coil and in the drip tray. The customer has noticed, after one month of

In this water culture plant, Refteco supplied air-evaporators with dual flow for the fish processing rooms, to ensure maximum hygiene and long life. Salmon processing,

We supplied two-way flow evaporators which could be installed on the ceiling, in which the batteries were treated with cataphoresis. This special treatment ensures high

The condensers were installed on the roof of the plant and have a cataphoresis-treated battery to guarantee high resistance to the type of corrosion typical

The caverns were initially mined for Dolomia rock, used in construction, and were later repurposed for use as natural refrigerators. The particular type of installation,

The evaporators are equipped with special fan-motors with high static pressure to provide 60 m air throw. The condensing units are equipped with screw compressors

The end user of this project has also required installation with very high COP and green solutions. For working rooms and loading/unloading areas we have

Therefore for the cooling tunnels we have developed tailor made finned exchangers with large area combined with powerful fan motors to ensure high air velocity

So, we designed special dual air discharge air coolers and air cooled condensers very efficient in order to grant low fan motors energy consumption and

The main target was to design the air coolers with high efficiency, so in order to reduce the energy consumption we supplied the air coolers

Thanks good cooperation with the engineering company responsible for the designing and the installation, we have found the right solution to design customized air coolers

The air coolers for this specific application are designed with big surface in order to grant low air dehumidification and special fans with controlled speed

Indeed, this type of material grants the best resistance to aggressive ambients like where the fish is worked and where it is usually normal employ,